MONIN syrup pump installation
and cleaning

The MONIN pump is an essential tool to deliver the right
amount of MONIN syrup into your drink creations.
Please read this manual carefully before using the pump.

Step 1

Remove the plastic pourer from the bottle

1. Hold the bottle firmly with your left hand (if you are right-handed) and a teaspoon in your right hand (or vice versa if you are left-handed). Do not use sharp objects such as knives, screwdrivers, etc.

2. Insert a teaspoon into the neck and press against the plastic pourer.

3. Take out the pourer in one movement.

Step 2

Install the pump

1. Clean the pump before first use.

2. Unlock pump (turn counterclockwise).

3. Place the pump in the bottle, do not screw the pump yet.

4. 2x pump fully press.

5. Pump can now be tightened on the bottle.

6. Ready to use.

Clean the pump

1. Unscrew the pump from the bottle and place it in warm soapy water.
2. Pump several times to remove the remaining syrup.
3. Pump through with clean water until the water is clear.
4. Remove the pump from the water.
5. Pump again until air comes out of the pump.
6. Detach the tube from the pump.
7. Let all parts dry.
8. Pump can now be screwed back on the bottle.
9. Ready for use.
Clean the pump twice a week (not in a dishwasher,
but rinse pump with warm water).